Your Position: Home > News > Industry News

Tungsten Alloy Of Oil Drilling

2016/5/4      view:
Tungsten alloy used in oil drilling as a drilling balance weight. It is always better to have the oil drilling enter the stratum deeper, which helps to get the stratum properties. High-performance oil drilling equipment is very important. It should be heavy and strong so as to balance excessive upward resistance and enhance the downward momentum. In fact, it must act as the balance weight of the entire apparatus. 

Tungsten alloy is the best material for manufacturing drilling equipment. The device must be heavy enough to enter the barite mud and hard enough to resist the water pressure in such a harsh environment. Most designs are detectors as well as positioning with high processing requirements. Mechanical properties play a core role in the operation of these parts. Because of the density of tungsten alloy up to 18.5g/cm3, and hardness reaching 36 HRC, as well as its abrasion resistance, impact resistance and durability, tungsten alloy becomes the best material of ground water, oil and natural gas drilling equipment. Its special mechanical property has exceeded lots of large parts.

We provide various tungsten alloy products using for balance weight of drilling tools and can also design drawings and produce products according to customers’ specific requirements. Products provided by us are semi-finished after pressing and sintering and finishing can be done to them, so as to make them into products needed by customers.